Car Wraps in Algonquin, IL

The Wrap You Only Pay For Once

Most wraps that fail were never going to last, and you cannot tell by looking at them on day one. We are 3M certified graphics installers and PDAA master certified, working out of one shop in Spring Grove. 4.8 stars across 130 Google reviews.
no image

Hear from Our Customers

no image

Vehicle Wraps Algonquin IL

How To Tell A Good Wrap From A Cheap One

A wrap looks the same on the day it is finished whether it was done properly or not. The difference shows up in the second winter, usually at the edges, around door handles and on the recesses where the vinyl was stretched instead of heated and laid.

Three things separate the two. The vinyl itself, whether the panels were properly cleaned and degreased first, and whether the edges were wrapped into the door jambs rather than cut flush at the seam.

Ask anyone quoting you those three questions. If the answer is vague, you will be paying for a second wrap sooner than you think.

Vinyl Car Wraps Algonquin IL

Certified, And Happy To Prove It

Road Rage Designs has wrapped vehicles for over twenty years from one shop in Spring Grove, Illinois, serving Algonquin and the rest of McHenry County. We are 3M certified graphics installers and PDAA master certified.

Those certifications are not decoration. They are what says the person touching your vehicle has been assessed on exactly the things above, rather than having learned on customer vehicles.

We design, print and install in house, so there is nobody to point at when something goes wrong, and nothing gets lost between two companies.

no image

Car Wrap Installation Algonquin IL

Clean Panel, Warm Room, Wrapped Edges

We measure the actual vehicle, not a template, because door handles and body lines sit differently on every make and a wrap drawn around the wrong ones lifts.

You approve a mockup on your own vehicle before anything prints. Changes are free up to that point, and we print in house so a revision costs an afternoon, not a week.

Then the vehicle comes in. Panels get cleaned and degreased, the install happens indoors where the vinyl will actually lay down, and edges get wrapped into the jambs. Two to three days for most single vehicles.

A person applies a blue vinyl wrap to a car’s hood, smoothing the material with a tool to ensure a clean, bubble-free finish.

Explore More Services

About Road Rage Designs

Car Wraps And Graphics Algonquin IL

Everything We Can Print And Fit

Full wraps, partial wraps, color change wraps and exotic textured vinyls for cars, vans and trucks. Vinyl cut lettering and door magnets when you want the name and number without the whole vehicle.

Commercial fleets, trailers, box trucks, buses and semi trucks, including US DOT compliance numbers. One design across the fleet so the artwork is paid for once.

Boats, jet skis, snowmobiles, ATVs and golf carts, plus signs, banners, window graphics and wall murals from the same shop.

The print work has its own pages here: custom banners in Algonquin and wall murals in Algonquin.

A person applies a blue vinyl wrap to the hood of a black car in a well-lit garage, smoothing out the material for a sleek finish.

How do I know a wrap was installed properly?

Look at the edges first. Vinyl should be wrapped around into the door jambs and openings, not trimmed flush at the seam, because a flush cut is where water and salt get underneath.

Then look at the recesses and curves. Vinyl that was stretched cold instead of heated will shrink back over the first year and you will see it pulling away from the deepest points.

Yes, more than most people expect. Cast vinyl conforms to curves and stays put. Cheaper calendered vinyl wants to go back to being flat, and on a curved panel it eventually wins.

That is most of the difference between a wrap that still looks right in year five and one that is embarrassing in year two.

Two to three days for most single vehicles. Lettering or a small partial can be a day, a full wrap on a large truck with detailed artwork takes longer.

Design and printing happen before the vehicle arrives, so that time is installation only.

Vehicle size first, then how much of it you are covering, then the artwork, then the vinyl. A quote given before anyone has looked at the vehicle is a guess.

Tell us the vehicle and what you want it to do and you will get a real number rather than a range that changes later.

Properly installed quality vinyl holds up through road salt and the freeze and thaw cycle for years. The wraps we get asked to fix early almost always failed at the install, not the material.

Hand wash through the winter rather than a brush wash, and keep the pressure washer back from the seams.

On sound factory paint, no. The vinyl shields the panel from chips, salt and sun and usually leaves it in better shape than the rest of the vehicle.

Repainted or already failing paint is the exception, and removal can lift it. We check the paint before starting and tell you if a panel is a risk.

Need a Quote? Have a question? Drop us a line!

CALL US

(815) 675-0690

EMAIL US

info@roadragedesigns.com

HOURS

Monday - Friday: 8:00 AM - 4:30 PM

Facebook